Professional provision of Chemical Auxiliaries
Provide high-quality products and technical services
Phone:0086-19876879286
Whatsapp:+86 13712258351
Enquiry
{name}{name} DEL
Contact Us
  • Dongguan Ruikun Material Technology Co.,Ltd.
  • TEL:0086-19876879286
  • Mobile phone:0086-19876879286
  • Whatsapp:+86 13712258351
  • Email:info@bestrkchem.com
  • Add:Jianshe Road, Nancheng District, Dongguan City

When issues with leveling, gloss, or storage stability arise in coatings, inks, or inkjet formulations, how should one go about re-selecting a defoamer?

2026-11-21

When issues with leveling, gloss, or storage stability arise in coatings, inks, or inkjet formulations, how should one go about re-selecting a defoamer?

 

It is no coincidence that these three issues—poor leveling, dull gloss, and phase separation or precipitation during storage—often appear together. Frequently, the root cause is not that "the foam hasn't been eliminated," but rather that the defoamer has been overdosed or the wrong type has been chosen. It is important to first clarify a fundamental principle: a defoamer functions precisely because it is "moderately incompatible" with the system. To break a foam bubble, the defoamer must be able to penetrate the bubble film and disrupt the local surface tension. Because this inherent, partial incompatibility exists, the defoamer naturally tends to migrate, precipitate, or otherwise alter the surface characteristics—tendencies that become more pronounced as the dosage increases. Therefore, when faced with these problems, the first response should be to "reduce the dosage or switch to a different type," rather than simply adding more. The product names mentioned are merely examples used to illustrate specific molecular structure types.

 

I. Three Symptoms, One Root Cause

Poor leveling manifests as brush marks, roller marks, orange peel, or edge retraction. An excess of defoamer can cause the surface tension of the system to drop too low and become non-uniform, leading to localized poor flow during the drying of the wet film. Furthermore, coarse droplets resulting from poor dispersion act as points of abrupt surface tension variation; as the coating levels out, these points manifest as visible streaks or marks.

A loss of gloss manifests as a dull appearance, haze, or the disappearance of a mirror-like finish. Mineral oils inherently reduce gloss; silicone-based additives can accumulate at the surface, creating microscopic irregularities; and particles precipitated from defoamers can scatter light within the film. This is most pronounced in high-gloss clear coats and varnishes, where the thinness of the film makes any such precipitation immediately apparent.

Storage instability manifests as phase separation, the formation of an oily surface layer, sedimentation, or a decline in defoaming efficacy over time. Incompatibility between the defoamer and the emulsion or resin can lead to separation during storage; certain chemical structures may undergo hydrolysis under conditions of high temperature and humidity; and some defoamers may be adsorbed and consumed by pigments, leaving little to no active agent remaining by the time the container is opened.

All three issues share a common origin: they indicate that the "limits of compatibility" have been exceeded.

 

II. Four Key Checks Before Switching Product Types

Verify the actual dosage. The typical range is 0.1% to 0.5%, with even lower levels required for high-gloss systems. Always consult the actual charging records rather than relying on the "standard formula."

Ensure proper dispersion. Adding the raw additive directly into a high-speed mixing vessel can create coarse droplets that are impossible to break down. For high-viscosity systems, add the additive slowly at low speed; if necessary, pre-dilute it using a compatible carrier.

Check the timing of the addition. Adding the entire amount at the very end can lead to excessive local concentration, causing defects in that specific area. Introduce 60%–70% of the defoamer during the grinding stage, and add the remainder during the paint-blending (let-down) stage to address any remaining foam.

Confirm that the additive type aligns with the desired appearance. For high-gloss, transparent, or thin-film coatings, use silicone-free or low-silicone additives; mineral oil-based additives should be reserved for matte primers. If the wrong type is chosen, reducing the dosage will not restore the intended gloss level.

 

III. How to Choose Between Types

Mineral oil-based additives offer good compatibility and low cost without causing cratering; however, they can dull gloss and reduce transparency, and are prone to oil separation. Consequently, they are suitable only for layers where appearance is not a priority, such as matte primers or intermediate coats.

Blended (composite) additives strike a balance between defoaming efficiency and compatibility, offering good versatility. Their primary drawback is batch-to-batch consistency—the risk of haze or cratering may shift when switching between batches.

Polyether-modified silicones provide high defoaming efficiency at low dosage levels, but they have a narrow "forgiveness" range; an overdose can trigger a trifecta of defects: cratering, haze, and migration. When used in high-gloss topcoats, their dosage must be kept to the absolute minimum effective level.

Non-silicone polyethers and polymer-based additives offer broad compatibility and virtually eliminate silicone migration. They have minimal impact on leveling, gloss, or intercoat adhesion, making them the preferred solution when issues arise in multi-layer coating systems, high-gloss finishes, or film-laminated applications. The trade-off is a milder defoaming action, which must be compensated for by incorporating the additive earlier in the process or during the dispersion stage.

 

IV. Re-selection Directions Across Seven Domains

Water-based Coatings: For high-gloss water-based industrial paints and water-based PU varnishes experiencing haze or poor leveling, first try reducing the dosage of silicone additives. If this does not resolve the issue, switch to a non-silicone alternative such as RK-3062 (provided here as an example of a specific molecular structure type), which has minimal impact on gloss and intercoat adhesion. For leveling issues in matte primers or latex paints, first examine the dispersion process and the timing of additive incorporation; in most cases, the issue does not stem from the specific product grade used.

 

Solvent-based Coatings: For "orange peel" or cratering in thick-film epoxy coatings, first check whether the dosage of RK-3109 exceeds 0.8%. If PU wood varnishes or high-gloss amino-cured baking enamels appear dull, switch to non-silicone additives like RK-3078 or RK-3120 to prevent silicone enrichment at the surface. In solvent-based systems, also evaluate the solvent evaporation gradient; leveling problems are frequently caused by excessively rapid drying.

 

UV-curable Systems: In applications involving thin films and high-gloss requirements—where haze is entirely unacceptable—utilize UV-compatible, non-silicone additives such as RK-3162 or RK-3122. These should be added prior to the grinding stage, with the dosage kept at the lower end of the 0.2%–1.0% range. Standard silicone additives or water-containing agents can lead to haze and poor curing.

 

Water-based Inks: Leveling affects dot formation, while gloss influences overall appearance. Use RK-8405 or RK-8409 to control foaming. For lamination or overprinting processes, switch to the non-silicone additive RK-3062 to prevent migration-related issues with intercoat adhesion. Given the low viscosity of water-based inks, an excess of defoamer has a more direct, negative impact on leveling than it would in standard coatings.

 

Solvent-based Inks: For leveling and gloss in thick-film screen-printing inks, use non-silicone additives like RK-3078 or RK-3120 at a dosage of 0.1%–0.6%, while simultaneously managing the drying rate. If haze appears in high-gloss overprint varnishes, first investigate whether any silicone-based substances or mineral oils have been introduced into the system. In inkjet printing, leveling relates to the spreading of ink droplets on the substrate, while gloss corresponds to the smoothness of the ink layer. Inkjet processes are highly sensitive to haze caused by additives; therefore, low-migration, non-silicone-based solutions—such as RK-3078 (for solvent-based systems) and RK-3062 (for water-based systems)—should be used. Any incompatible components within the formulation will be immediately apparent in the appearance of the printed output.

 

Color pastes. Storage stability is a key performance indicator for color pastes; any separation or precipitation of defoamers within a water-based color paste will persist and affect downstream applications. Use RK-8409 or the silicone-free RK-3062, keeping the dosage at the lowest effective level. Allow the product to stand before filling to ensure air bubbles are released, thereby preventing both bubbles and any precipitated components from being carried over into the final packaging.

 

V. How to Conduct Verification

There are four key aspects to evaluate: wet-film leveling (observing orange peel and brush marks after application via brush or roller); gloss and haze values after drying; stability during seven-day heat storage (checking for phase separation or precipitation); and the product’s defoaming capability after prolonged storage (verifying whether it can still effectively suppress foam). The first two criteria assess appearance, while the latter two evaluate performance over time. Relying solely on an immediate visual assessment would mean overlooking potential issues related to long-term storage.

 

FAQ

1. If gloss fails to reach the target, should I suspect the defoamer or the resin? First, examine the nature of the haze and the dosage used. Defoamers typically cause uniform hazing and a loss of mirror-like finish, whereas a resin with inherently low gloss results in an overall matte appearance. The quickest diagnostic step is to conduct a dosage-reduction test; if the haze diminishes, the defoamer is the likely culprit.

 

2. Does poor leveling indicate an insufficient amount of defoamer? Usually, it is the opposite. Poor leveling is more often caused by uneven surface tension resulting from an excessive dosage or poor dispersion. Try reducing the dosage or adjusting the dispersion method before considering a different type of defoamer; increasing the dosage will only exacerbate the surface tension imbalance.

 

3. Can mineral oil-based defoamers be used in high-gloss systems? It is not recommended. Mineral oils inherently reduce gloss and transparency, leading to hazing in high-gloss clear coats or varnishes. They are better suited for matte primers or intermediate coatings.

 

4. Why does a defoamer’s effectiveness decrease after long-term storage? This could be due to structural hydrolysis, slow reactions with other components in the system, or adsorption/consumption by pigments. In waterborne systems, shifts in pH can also be a factor. Increasing the dosage will not resolve these issues; you should switch to a product with better chemical stability.

 

5. Why does the same defoamer produce normal gloss in one batch but cause hazing in another? This is common with blended products, where fluctuations in the ratio of carriers or active ingredients between batches alter the tendency for precipitation. Request batch-consistency data from your supplier, or switch to a non-silicone product with a more uniform chemical structure.

 

6. Can pre-dilution improve leveling and gloss? Pre-dilution can enhance dispersion uniformity and reduce localized defects caused by large droplets, but it cannot alter the inherent compatibility of the additive. Choosing the wrong carrier can introduce new problems; therefore, diluted solutions should be prepared fresh for immediate use.

 

7. Does phase separation during storage always indicate an issue with the defoamer? Not necessarily. Phase separation can also be caused by an unstable thickening system, pH drift, or the demulsification of the resin emulsion itself. To quickly determine the cause, prepare a control sample without the defoamer and observe it under the same storage conditions.