Issues to note when using agricultural organosilicon synergist
When using agricultural organosilicon enhancers, you need to pay attention to the following key issues
to ensure its effectiveness and safety:
1. Preparation and inspection before use
Product quality: Ensure the quality of organosilicon synergist is reliable, and avoid using expired or poor
quality products.
Usage ratio: Strictly follow the dosage ratio in the instructions for mixing and adding, do not use excessive
or wrong amounts to avoid harming plants.
2. Precautions when using
Ready to use: Try to prepare and use immediately, and the prepared liquid should be used up within 4 hours
to ensure the efficacy.
Spraying technology:
Appropriately reduce the amount of water used for spraying, and speed up the spraying walking speed. The spray
amount should form a water film but not droplets.
Pay attention to uniform spraying to ensure that the plant leaves and the surface of the pest body can fully contact
the liquid.
Wear protection: During the spraying process, protective equipment should be worn according to the requirements for
the use of pesticides, and special attention should be paid to the protection of the eyes.
Avoid high temperature application: It is not suitable to add organosilicon enhancers in high temperature environments,
because it may cause pesticide damage. It is best to apply the pesticide before 10 am and after 4 pm.
Crop adaptability: For some crops, especially those with thinner wax layers on leaves, you may need to be cautious when
using silicone enhancers, because it may cause the plant's water retention capacity to decrease, cell damage, and then
pesticide damage.
3. Mixing and compatibility
Mixed pesticides: When mixed with certain pesticides, silicone synergists may enhance the efficacy of the pesticide, resulting
in excessive efficacy. Therefore, it is not recommended to mix with some pesticides that are prone to pesticide damage
(such as flusilazole, flufenoxazole, etc.).
Compatibility check: Before mixing, a small-scale compatibility test should be carried out to ensure that there will be no adverse
reactions between silicone enhancers and pesticides.
4. Subsequent treatment and maintenance
Cleaning tools: The sprayer and other related tools should be cleaned in time after use to avoid blockage or corrosion caused by
residual liquid.
Observe crop reactions: The reaction of the crop should be closely observed after application. If symptoms of pesticide damage occur,
remedial measures should be taken in time.
5. Safety and environmental protection
Safe storage: Store organosilicon enhancers out of reach of children to avoid accidental ingestion or contact.
Environmental protection: Prevent the liquid from flowing into water sources or causing environmental pollution. Empty containers after
use should be properly handled and not discarded at will.
In summary
when using agricultural organosilicon synergist, attention should be paid to product quality, dosage ratio, spraying technology, wearing protection,
avoiding high temperature application, crop adaptability, mixing and compatibility, subsequent processing and maintenance, as well as safety and
environmental protection. By following these precautions, the effectiveness and safety of organosilicon enhancers can be ensured, and the utilization
rate and control effect of pesticides can be improved.
