Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

替换城市 Principle and influencing factors of special Free of silicone defoamers agents for paints(4)

2023-05-14

agent

feeling

dispersant

Action mechanism of polysiloxane defoamer
The representative defoaming mechanisms of polysiloxane mainly include "bridging spreading" mechanism, "bridging dehumidifying" mechanism, and "spreading liquid entrainment" mechanism. The "bridging spreading" mechanism mainly starts from the basic point of "polysiloxane has a relatively low tension and is easy to spread on the liquid film." It emphasizes that defoamer droplets are prone to deformation, but this theory cannot explain the defoaming differences between individual polysiloxanes and mixtures of polysiloxanes and solid ions as defoamers. The "bridging dehumidification" mechanism is mainly based on the hydrophobicity of polysiloxanes themselves, but the defoaming effect of polysiloxanes with high viscosity cannot be well explained. The "spreading liquid entrainment" mechanism cannot be confirmed because some facts indicate that polysiloxanes sometimes do not spread on the surface of the foam film, but can also break the foam.

water-based

When the paint is baked at high temperature at room temperature, its viscosity will drop at the beginning, and bubbles can move to the surface. However, because of the volatilization of solvent, the curing of paint, and the increase of surface viscosity, the foam will become more stable and retain on the surface, resulting in shrinkage and pinholes. Therefore, the baking temperature, fixing speed, and solvent volatilization rate also have an impact on the effect of defoamer.

Solid content, viscosity, elasticity of paint

替换城市  High solid thick film, high viscosity and high elasticity coatings are very difficult to defoamer. In these coatings, defoamer diffusion is difficult, microbubbles become larger slowly, foam migration ability decreases, foam viscoelasticity is large and many other adverse defoamer factors. Foam in these coatings is very difficult to eliminate, so defoamer and defoamer should be used together.