Portugal What are the UV curing defoamer for paints(2)
not
epoxy
Precautions for use of paint UV curing defoamer:
anti-flocculation
Leveling agent is a commonly used coating additive that can promote the formation of a flat, smooth, and uniform coating film during the drying process. A class of substances that can effectively reduce the surface tension of finishing fluids and improve their leveling and uniformity. It can improve the permeability of the finishing liquid, reduce the possibility of spots and stains during brushing, increase coverage, and make the film formation uniform and natural. Mainly surface active agents, organic solvents, etc.
pigment
Before use, stir thoroughly and mix evenly; Adding the paint while stirring; Before use, it is generally not diluted with water; The dosage should be appropriate. Excessive dosage can cause shrinkage, edge shrinkage, poor brushing performance, and other problems; Too little dosage leads to poor defoaming effect; Add it in two stages, namely, add it in the grinding stage and the paint mixing stage, generally accounting for half of the total amount each time. Use defoaming agents with good foam suppression effect in the grinding stage, and use defoaming agents with good foam breaking effect in the paint mixing stage