Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

Dominica What are the UV curing defoamer for paints(1)

2023-05-15

Dominica Selection of antifoaming agents for different applications:

Flat coating

Features: Low viscosity, low defoaming pressure

Recommendation: Mineral oils or mineral oil modified polyethers

Elastic coating

agent

Features: High viscosity, high UV curing defoamer pressure

UV

dispersant

Recommendation: Polyether modified silicone

Polydimethylsiloxane
Although it has good surface state control capabilities, it has many shortcomings, such as poor compatibility, which can affect the gloss of the coating film, and often lead to shrinkage, interlayer adhesion issues, and so on. The molecular weight of polydimethylsiloxane is different, and its compatibility and use are also different. Compared with silicone oil, organic modified polydimethylsiloxane has obvious advantages, not only retaining the advantages of siloxane, but also overcoming its disadvantages with modifiers, exerting many special functional effects. The key to the performance and use of modified siloxanes is their molecular weight, type, type of modified compound, and position in the molecule. There are many ways to modify them

dispersant

Surface coating and film covering adhesive

Recommendation: Polyethers, which can effectively prevent surface defects and have a small impact on gloss

penetrating

Water in Water Colorful

not

Elimination of foam
(1) Physical methods
From the physical point of view, the methods to eliminate foam mainly include placing baffle or filter screen, mechanical agitation, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure reduction, high-frequency vibration, instantaneous discharge and ultrasound (acoustic liquid control). These methods promote the gas transmission rate at both ends of the liquid film and the liquid discharge of the bubble film to varying degrees, making the stability factor of foam less than the attenuation factor, As a result, the number of foam gradually decreased. However, the common disadvantage of these methods is that their use is strongly restricted by environmental factors, and the defoaming rate is not high. The advantages are environmental protection and high reuse rate.

Defoamer is an additive for eliminating foam. A large amount of foam will be produced in the production and application process of coatings, textiles, medicine, fermentation, paper making, water treatment, petrochemical and other fields, which will affect the product quality and production process. Based on the inhibition and elimination of foam, a specific amount of defoamer is usually added to it during production

Features: More surfactants, stable foam

Dominica Recommendation: Use polyethers or mineral oil to modify polyethers

Precautions for use of paint UV curing defoamer:

Before use, stir thoroughly and mix evenly; Adding the paint while stirring; Before use, it is generally not diluted with water; The dosage should be appropriate. Excessive dosage can cause shrinkage, edge shrinkage, poor brushing performance, and other problems; Too little dosage leads to poor defoaming effect; Add it in two stages, namely, add it in the grinding stage and the paint mixing stage, generally accounting for half of the total amount each time. Use defoaming agents with good foam suppression effect in the grinding stage, and use defoaming agents with good foam breaking effect in the paint mixing stage