Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

Mozambique Application of UV curing defoamer Agent in Sand Washing Wastewater Treatment(3)

2023-05-17

affect

affect

agent

agent

Polyether polyester modified organosiloxane
An organic polysiloxane with a comb like structure. N+m is about 50-250, and the molecular weight is controlled between 1000-150000. Its compatibility is adjusted by polyethers and polyesters, and the longer the chain, the better the phase compatibility. Polyether modifications are the most common in this category, typically using ethylene oxide and propylene oxide. With the increase of the content of ethoxy groups, their compatibility with water also improves, so it is also possible to synthesize water-soluble siloxane type leveling agents. Ethylene oxide and propylene oxide can be used alone or mixed to control hydrophilicity and lipophilicity. If both ethoxy and propoxy groups are contained, a silicone based leveling agent for both water and oil use is prepared,

Mozambique In addition, the sand washing wastewater treatment UV curing defoamerr can also be used for the wastewater after sediment cleaning. This system is different from wastewater treatment. In order to make the sediment cleaning effect better, the staff will add stabilizer and cleaning agent to assist in cleaning. The foaming factor in these additives is also one of the culprits for the emergence of a large number of foam. The polyethers in the sand washing wastewater treatment UV curing defoamer are specially designed for the sediment cleaning system, mainly to solve the foam in the process of water circulation washing sediment, and also applicable to the water treatment stage in the mud water separation.