Brunei Differences in water-based mineral oil UV curing defoamer(3)
Defoaming mechanism of hydrophobic solid particles
Hydrophobic solid particles in the foam system will first attract the hydrophobic end of the surfactant, making the hydrophobic solid particles become hydrophilic, thus reducing the concentration of surfactant in the foam film and promoting the foam to burst. This defoaming mechanism cannot explain the action mechanism of other defoaming agents, which is too one-sided. [4] Other reasons for the bursting of foam are the impact caused by the expansion of defoamer, the solubilization of surfactant and the collapse of electrolyte, and the bursting of electric double layer on the liquid film surface. [4] It can be seen from the above defoaming mechanisms that each defoamer has different emphasis on different foam systems, but defoaming is achieved by destroying the stability factors of foam
not
and
agent
替换城市 Waterborne mineral oil UV curing defoamer are suitable for use in water-based systems with weak emulsifying properties, such as latex paints, coatings, adhesives, inks, and other systems with low emulsifying properties. They are easy to emulsify and form uniform distribution in water-based systems, thereby reducing the likelihood of surface defects such as shrinkage and loss of gloss, and also reducing microbubbles. However, it should be noted that mineral oils and waxes, which contain a small amount of organosilicon, and adopt special preparation processes, have excellent product storage stability, and are not prone to separation or sedimentation even after long-term storage.