Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

Saint Kitts and Nevis What are the advantages of UV curing defoamer for water-based cleaning agents(2)

2023-04-28

dispersant

repellant

Stability factors of foam
The direct cause of foam is the presence of surfactant, which reduces the surface tension of the solution. Under the combined effect of this reason and the attenuation mechanism of foam, different foam systems show different stability properties, which are mainly related to the following factors: the surface tension of foaming solution, the surface viscosity of foam, the viscosity of solution, the self-healing effect of surface tension (i.e. Gibbs surface elasticity and Marangoni effect) "The surface double layer repulsion and entropy repulsion forces of liquid membranes, the hydrophobic end structure of surfactants, and the steric hindrance effect are not independent factors, and changes in one factor can cause other factors to also change.". The most important factors affecting the stability of foam are the elasticity of the liquid film and the liquid discharge rate. From this perspective, it can be seen that the main factors affecting the stability of foam are different in different foam systems, and sometimes several factors exist at the same time and work together.
In addition to the above factors, some other factors will also affect the stability of foam, such as the size of foam, the coordination of solute and solvent, temperature, pH value, the evaporation rate of solvent, the impact degree of foam and the adsorption rate of surfactant

UV

Water based cleaning agent Defoamer is a polyether based composite defoamer. Due to its water soluble energy consumption, it is easily dispersed in the cleaning agent system, making it convenient and fast to use. No oil phase or little oil phase, excellent defoaming and foam suppression ability and high temperature resistance make it suitable for the production of water-based cleaning agents, effectively eliminating and preventing the regeneration of foam. During production, it can be added after the foam is produced or as a foam inhibitor. According to different use systems, the amount of water based detergent defoamer can be 0.1%~0.8%, but the optimal amount should be determined according to the actual situation. If it is necessary to dilute the defoamer, it is best to conduct a small amount of testing before actual use to avoid abnormalities.

metal

hammering

dispersant

wetting

Saint Kitts and Nevis Will UV curing defoamer agents for water-based cleaning agents have a negative impact:

Many people often have concerns when choosing to add water-based defoamers in the production of cleaning agents. Do water-based defoamers affect the viscosity, transparency, and performance of cleaning agents. In fact, the detergent that plays a decontamination role is a surfactant. When the surfactant is dissolved in water, it removes dirt by emulsifying, dispersing, and solubilizing oil. Therefore, the decontamination ability of the detergent is not necessarily related to its viscosity and transparency, so the water-based defoamer does not affect its viscosity and transparency. The decontamination ability of cleaning agents is mainly related to the formula, that is, surfactants, such as anionic surfactants, have more foam than non-ionic surfactants. On the contrary, the defoamer of water-based cleaning agent can also reduce the production of foam and make foam disappear where it should not be, thus greatly improving the effect of cleaning agent.