Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

Albania What are the No Foam for paints(2)

2023-04-28

defoamer

wetting

water-based

Stability factors of foam
The direct cause of foam is the presence of surfactant, which reduces the surface tension of the solution. Under the combined effect of this reason and the attenuation mechanism of foam, different foam systems show different stability properties, which are mainly related to the following factors: the surface tension of foaming solution, the surface viscosity of foam, the viscosity of solution, the self-healing effect of surface tension (i.e. Gibbs surface elasticity and Marangoni effect) "The surface double layer repulsion and entropy repulsion forces of liquid membranes, the hydrophobic end structure of surfactants, and the steric hindrance effect are not independent factors, and changes in one factor can cause other factors to also change.". The most important factors affecting the stability of foam are the elasticity of the liquid film and the liquid discharge rate. From this perspective, it can be seen that the main factors affecting the stability of foam are different in different foam systems, and sometimes several factors exist at the same time and work together.
In addition to the above factors, some other factors will also affect the stability of foam, such as the size of foam, the coordination of solute and solvent, temperature, pH value, the evaporation rate of solvent, the impact degree of foam and the adsorption rate of surfactant

Precautions for use of paint No Foam:

Before use, stir thoroughly and mix evenly; Adding the paint while stirring; Before use, it is generally not diluted with water; The dosage should be appropriate. Excessive dosage can cause shrinkage, edge shrinkage, poor brushing performance, and other problems; Too little dosage leads to poor defoaming effect; Add it in two stages, namely, add it in the grinding stage and the paint mixing stage, generally accounting for half of the total amount each time. Use defoaming agents with good foam suppression effect in the grinding stage, and use defoaming agents with good foam breaking effect in the paint mixing stage