Professional provision of Chemical Auxiliaries
Provide high-quality products and technical services
Phone:0086-19876879286
Whatsapp:+86 13712258351
Enquiry
{name}{name} DEL
Contact Us
  • Dongguan Ruikun Material Technology Co.,Ltd.
  • TEL:0086-19876879286
  • Mobile phone:0086-19876879286
  • Whatsapp:+86 13712258351
  • Email:info@bestrkchem.com
  • Add:Jianshe Road, Nancheng District, Dongguan City

What problems do dispersants solve in coatings and inks? A guide to selection across seven different systems.

2026-11-19

What problems do dispersants solve in coatings and inks? A guide to selection across seven different systems.

 

 

When pigments are introduced into a system, they naturally tend to form clusters (agglomerates). While milling can break these clusters down into smaller particles, it is the dispersant that ensures they remain dispersed and do not re-agglomerate. In short, the role of a dispersant is to de-agglomerate pigments, stabilize them, and allow their true color to be fully realized. If this process is not handled effectively, it can lead to issues such as failure to meet fineness specifications, unstable viscosity, or the development of coarse particles during storage. In the final product, this may manifest as color streaking, floating, poor hiding power, or a dull, lackluster gloss. Note that dispersants do not address air bubbles or leveling issues; be careful not to conflate these problems. The following discussion is organized into three parts: the problems addressed, classification based on pigment types, and selection criteria for various application areas. The specific product names mentioned are provided merely as examples to illustrate different types of molecular structures.

 

I. Six Types of Issues Addressed

Grinding efficiency and fineness. Dispersants facilitate the rapid deagglomeration of pigment clusters once they are wetted. This ensures the target fineness is achieved using the same equipment and within the same timeframe; without a dispersant, the required grinding time increases, yet the desired fineness often remains unattainable.

Coarsening and flocculation. This is the primary value of a dispersant. Pigment particles are kept apart through anchoring and steric hindrance. Without this protective layer, particles tend to re-aggregate—a phenomenon known as "coarsening"—where the fineness deteriorates after just a couple of days.

Color development. For any given pigment, the degree of dispersion directly impacts color intensity and saturation. If the full coloring potential is not unlocked, one must compensate by adding more colorant, which drives up costs.

Floating and flooding. In multi-pigment systems, pigments often differ in their sedimentation rates and surface properties. If they are not adequately protected, some pigments may be displaced by the resin, leading to uneven color distribution (mottling or streaking) on the paint film surface.

Settling and hard caking. Inorganic pigments with high specific gravity tend to settle to the bottom in low-viscosity systems, eventually forming hard, intractable cakes. An appropriate dispersant can slow down sedimentation and ensure that any settled material remains loose and easily redispersible.

Gloss, hiding power, and storage stability. Insufficient fineness results in a dull finish and poor hiding power. Furthermore, if a dispersed system breaks down during storage, it can lead to color drift and an increase in viscosity.

 

II. Determine the approach based on pigment type

Inorganic pigments (such as titanium dioxide, iron oxide yellows/reds, and calcium carbonate fillers) typically have larger particle sizes and distinct surface polarity. The primary focus here is on achieving good spreading and preventing sedimentation; the requirement for anchoring strength is relatively moderate.

Organic pigments (such as phthalocyanine blues/greens, permanent violets, and azo yellows/reds) feature fine particle sizes and high surface energy. These are the main source of challenges in color development, necessitating polymeric dispersants that offer high anchoring density and a thick steric hindrance layer.

Carbon black possesses the largest specific surface area and is the most difficult to wet. Due to its strong adsorption capacity, it tends to "consume" a portion of the dispersant; therefore, it requires specialized dispersants with a multi-point anchoring structure—standard, general-purpose products often prove ineffective.

 

III. Selection Across Seven Application Areas

Water-based Coatings: For latex paints and water-based industrial coatings—which primarily utilize inorganic pigments—RK-4008DH (provided here as an example of a specific molecular structure type) is an ideal choice, offering excellent anti-settling performance in aqueous systems. For paints based on organic pigments, where color development is critical, RK-4058 or RK-4059 should be used; these offer a balance between effective color development and broad compatibility across various systems.

Solvent-based Coatings: In baking enamels, polyurethane (PU) coatings, and epoxy-based tinting systems, the dispersant must be compatible with both the solvents and the resins. For standard inorganic and organic pigments, RK-4061C0 or RK-4036B are suitable. Carbon black is notoriously difficult to disperse in solvent-based systems; for this, a dispersant with a multi-point anchoring structure, such as RK-4035AC, is recommended.

UV-curable Coatings: These systems are solvent-free, highly viscous, and cure rapidly. Dispersants used here must be moisture-free and must not inhibit the polymerization process; furthermore, they must effectively stabilize pigments during the low-viscosity grinding phase. Polymeric dispersants compatible with acrylic systems are preferred. Carbon black and organic pigments should be treated separately, and grinding temperatures must be strictly controlled—excessive grinding can break the chains of the dispersant molecules. Recommended products include RK-4012 and RK-4029.

Water-based Inks: Used in flexographic and rotogravure printing, these inks rely on water for dispersion. Due to their high pigment concentration, issues such as pigment re-agglomeration (coarsening) and plate clogging are common. For general-purpose colored inks, use RK-4010 or RK-4017G; for carbon black-based inks, use RK-4059.

Solvent-based Inks: Employed in screen and rotogravure printing, these inks form thin films and dry quickly. Poor dispersion manifests directly as faint or blurred halftone dots and uneven, mottled print surfaces. Use RK-4035 or RK-4036B; for carbon black-based systems, use RK-4035AC.

Inkjet and Digital Inks: This category imposes the most stringent requirements regarding particle size. The diameter of the printhead nozzle dictates the maximum allowable particle size; any re-agglomeration (coarsening) of the pigment will inevitably lead to nozzle clogging. For water-based systems, select polymeric-type dispersants that contribute minimally to viscosity; options such as RK-4059 or RK-4054EF are suitable. For sub-micron specialty powders (e.g., yttrium oxide), products with structures like those of RK-4017 or RK-4039AB are effective for both size reduction (milling) and stabilization.

Regarding pigment pastes: As these are semi-finished products intended for use across various downstream systems, versatility is the primary consideration. For general-purpose water-based pigment pastes, use RK-4010 or RK-4017G; for general-purpose organic pigment pastes, use RK-4059 or RK-4054EF. When developing high-performance pigment pastes designed for incorporation into UV-curable or polyurethane (PU) systems, choose dispersants with high versatility and robust anchoring capabilities to prevent issues such as color flooding (mottling) or pigment re-agglomeration (coarsening) during the transition between systems.

 

IV. Essential Rules to Follow

Determine dosage based on the pigment's specific surface area, not as a fixed percentage of the total formulation. Carbon black and organic pigments have significantly higher specific surface areas than inorganic pigments; therefore, using the same percentage by weight results in a vast difference in the actual surface area covered.

Add dispersants early. Introduce them before adding the pigments or during the premixing stage so they can occupy the pigment particle surfaces; adding them after the grinding process is complete significantly diminishes their effectiveness.

Do not focus solely on fineness. Achieving the target fineness is merely the first step; you must also evaluate color development, viscosity, and whether the dispersion coarsens (re-agglomerates) during storage. Many pigment pastes that meet fineness specifications can flocculate after just two weeks of storage.

Pair with wetting agents. Wetting agents facilitate the rapid wetting of powders, while dispersants ensure long-term stability. If wetting is insufficient, the adsorption of dispersants is slowed, which hinders grinding efficiency.

Over-grinding is counterproductive. Extending the grinding time too long can cause the molecular chains of the dispersant to break, which actually increases the likelihood of the pigment particles coarsening again.

 

FAQ

1. Can a dispersant solve issues with air bubbles or leveling? No. Dispersants are designed for pigment deagglomeration, stabilization, and color development; air bubbles are addressed by defoamers, and leveling issues by leveling agents. Attempting to fix these problems with the wrong additives often leads to the creation of new defects.

 

2. Why does a pigment dispersion that meets fineness specifications become coarser after a few days? This is usually due to insufficient anchoring or an inadequate steric hindrance layer. The pigment particles are not effectively kept apart and tend to re-aggregate when left to stand. Try using a dispersant with stronger anchoring groups, increase the dosage, and verify the fineness again after a heat-aging test.

 

3. Why is carbon black more difficult to disperse than other pigments? Carbon black has a high specific surface area, high oil absorption, and strong surface polarity. These characteristics cause it to adsorb and consume a portion of the dispersant, leaving an insufficient amount to act on the particles themselves. You should use a specialized dispersant with a multi-point anchoring structure, and recalculate the required dosage based on the specific surface area.

 

4. Can the same dispersant be used for both inorganic and organic pigments? It is possible, but performance will likely be compromised. Inorganic pigments require stabilization against settling, while organic pigments require deagglomeration and color development. Since the two types have different requirements for anchoring density and the thickness of the steric hindrance layer, using a single dispersant for both often results in suboptimal performance for one or the other.

 

5. If a pigment paste causes color streaking (mottling) when switched to a different resin system, is the paste at fault? A common cause is poor compatibility between the dispersant and the new resin; the resin may displace the dispersant from the pigment surface, leaving the pigment unprotected. Choose a more versatile dispersant and conduct compatibility tests by incorporating the pigment paste into the target resin system.

 

6. Does adding more dispersant always lead to better color development? No. Once the optimal dosage is exceeded, the excess dispersant remains free in the system, which can lower viscosity, impair water resistance and adhesion, or even cause antagonism with other additives. Calculate the dosage based on the specific surface area and perform a gradient test to identify the "inflection point" (the optimal concentration).

 

7. How can one determine whether a dispersant is truly effective? Evaluate four criteria: the time required to grind to the target fineness, color intensity at a given dosage, changes in fineness and viscosity after heat aging, and compatibility across various systems. Relying solely on the fineness immediately after grinding is insufficient for a proper assessment.