How should one re-select a dispersant when encountering "flooding" or "floating" (color separation/mottling) in coatings, inks, or inkjet formulations?
While the terms "flooding" and "floating" are often used interchangeably, they actually refer to two distinct phenomena. Both occur in multi-pigment systems, but without identifying which specific issue is present, selecting a replacement dispersant becomes a mere guessing game. Simply put: "flooding" (or uniform color separation) occurs when the surface color deviates uniformly from the bulk color—for example, a blue paint developing a whitish cast on the surface. "Floating" (or mottling/streaking) manifests as irregular patches, honeycomb patterns, or streaky, filament-like marks, resulting in uneven color intensity across a single surface. These two phenomena involve different underlying mechanisms and require different troubleshooting approaches. This guide will first clarify the distinctions, then outline how to investigate the issues, and finally provide recommendations categorized by seven specific application areas. The product names mentioned are provided merely as examples to illustrate specific molecular structure types.
I. Distinguishing Between "Floating" (浮色) and "Mottling/Flooding" (发花)
"Floating" refers to the vertical stratification of pigments. Due to differences in particle size, density, and the degree of flocculation, finer and lighter particles tend to migrate toward the surface, while coarser and heavier particles remain below, resulting in a color shift at the surface. This phenomenon is often linked to the drying rate and tends to be more pronounced when the drying process is slow.
"Mottling" (or "flooding" in some contexts) refers to uneven distribution in the horizontal plane. A classic manifestation is a honeycomb-like or hexagonal pattern, known in the industry as "Bénard cells." As solvents or moisture evaporate from the wet film, localized cooling at the surface—combined with surface tension gradients—drives a vertical circulation of the liquid. This movement carries the pigments along, creating regular, patterned structures. The root causes of this phenomenon lie primarily in the solvent system, evaporation gradients, and surface tension, rather than solely in the dispersant.
How to diagnose: Check for regular geometric patterns; if present, the issue is likely driven by convection. If there is a uniform shift in the overall hue, it is likely driven by pigment migration. Additionally, observe whether the phenomenon changes upon stirring the mixture or altering the solvent system. In both cases, the role of a dispersant is limited to ensuring "balanced stabilization" (i.e., whether the pigments are protected equally); it cannot address issues driven purely by convection.
II. Four Key Factors to Verify Before a Product Changeover
Are multiple pigments sharing the same dispersant? This is the most frequent root cause of color flooding and floating. A dispersant’s adsorption strength varies across different pigments; pigments with stronger adsorption are well-stabilized, while those with weaker adsorption are left neglected and gradually flocculate, leading to color separation.
Are the pigments ground separately? Grinding individual color pastes separately before blending them into the final paint is far more stable than co-grinding all pigments together. In a co-grinding process, pigments compete for the available dispersant, leading to unpredictable results.
Is there competition between the dispersant and the resin? In systems with high-acid-value or highly polar resins, the resin may displace some of the dispersant from the pigment surfaces, causing the affected pigments to flocculate.
What about pigment batches and surface treatments? Changing suppliers or altering surface treatment methods can change adsorption behavior. This factor is the most easily overlooked, as issues may not appear immediately—often only surfacing with a subsequent batch.
III. Three Technical Approaches
Enhancing versatility. Select a dispersant with a broad range of anchoring groups capable of binding to the surfaces of various pigments, ensuring relatively uniform protection across different pigment types. This is the most straightforward approach, suitable for systems with a limited variety of pigments and less stringent requirements for color accuracy.
Separate-pigment milling. Prepare individual pigment dispersions (color pastes) using the dispersant best suited to each specific pigment, then combine them during the final paint formulation. This offers the best stability, though it increases the complexity of the production process and inventory management.
Strengthening anchoring and steric hindrance. Utilize dispersants with higher molecular weights and thicker steric hindrance layers. This makes it more difficult for the resin to displace the dispersant from the pigment surface, thereby minimizing disparities caused by selective adsorption.
IV. Re-selection Strategies Across Seven Application Areas
Water-based Coatings: Latex paints and water-borne industrial coatings often involve multi-pigment blends, where "floating" (pigment separation) manifests as color deviation in the applied film. First, determine whether the pigments are co-ground; if possible, grind them separately. For co-ground systems, switch to highly versatile dispersants such as RK-4044 or RK-4065 (examples provided to illustrate molecular structure types), and process inorganic pigments into separate slurries using RK-4008DH or RK-4010. Additionally, ensure pH stability; a drop in the degree of dissociation will exacerbate selective adsorption.
Solvent-based Coatings: In baking enamels, polyurethane (PU), and epoxy systems, floating and flooding are often compounded by convective currents. Begin by adjusting the solvent evaporation gradient—incorporating slower-evaporating components—to suppress convection. Regarding dispersants, opt for versatile agents like RK-4033 or RK-4031. Whenever feasible, grind pigments separately; for instance, process carbon black independently using RK-4035AC.
UV-curable Systems: Characterized by a lack of solvents and minimal volatility, these systems rarely exhibit pure convection-driven issues. Instead, problems typically stem from pigment migration or uneven dispersion within high-viscosity media. Select dispersants with strong compatibility with acrylic monomers and broad versatility. For multi-pigment systems, separate grinding is recommended, as solvent-based adjustment strategies are not applicable here. Suggested grades: RK-4012, RK-4061CF.
Water-based Inks: Issues often include color shifts during multi-color overprinting or inconsistent color depth across the printed surface. For co-ground colored inks, switch to RK-4010 or RK-4017G, and aim to prepare primary color slurries separately. Furthermore, evaluate the drying rate and surface tension of the ink film, as these factors have an impact on flooding and floating that is just as significant as that of the dispersant.
Solvent-based Inks: In multi-color screen printing or applications involving thick ink layers, flooding and floating often manifest as mottling or streaking on the printed surface. For carbon black, use RK-4035AC; for other pigments, consider RK-4036 or RK-4061C0. When applying thick ink layers, pay close attention to the solvent evaporation gradient—slowing down the drying process can significantly mitigate mottling or streaking.
Inkjet Inks. In inkjet systems, each colored ink is typically formulated individually. While issues like pigment floating or flooding are less common here than in standard coatings, they can still occur—particularly in light-colored inks, spot-color inks (which contain multiple pigments), or during multi-color overprinting, where they may lead to hue shifts. In such cases, treat the formulation as a "multi-pigment" system: select highly versatile dispersants (e.g., RK-4035AB or RK-4061CF for solvent-based systems; RK-4039AB or RK-4059 for water-based systems). Additionally, maintain strict control over particle size and filtration to prevent the combined effects of pigment migration and flocculation.
Color Concentrates (Color Pastes). Color concentrates are often the root cause of floating and flooding. For solvent-based universal concentrates, opt for highly versatile options like RK-4012 or RK-4061CF; for water-based concentrates, use RK-4010 or RK-4017G. If a universal concentrate contains multiple co-ground pigments, it is often better to separate them into individual, single-pigment concentrates; this significantly improves stability when blending colors later in the process.
V. How to Conduct Verification
Do not rely solely on a single draw-down panel to evaluate color. Perform at least three checks: examine the pattern formation using the same formulation under conditions of both static settling and slow drying; conduct draw-downs for individual colorants and blended color mixtures to compare their hues; and repeat the color comparison after seven days of heat-aging—many instances of pigment floating or separation only emerge over time rather than appearing immediately. If possible, also compare results across different film thicknesses, as thicker films are more prone to revealing pigment migration.
FAQ
1. Are "floating" (color separation/floating) and "mottling" (streaking/patchiness) the same thing? No. "Floating" refers to a uniform shift in the overall surface hue, resulting from pigment stratification in the vertical direction. "Mottling" manifests as irregular spots or honeycomb-like patterns on the surface, typically caused by Bénard cells (convection currents). The former is primarily related to pigment dispersion and migration, while the latter is driven by solvent evaporation and surface tension.
2. Why does mottling persist even after switching to a more versatile dispersant? If the patterns exhibit regular geometric shapes, the primary driver is likely convection rather than the dispersant. In such cases, you must first adjust the solvent evaporation gradient, the proportion of slow-evaporating components, and the surface tension; simply changing the dispersant will not resolve the issue.
3. Why should pigments be ground separately in multi-pigment systems? During co-grinding, different pigments compete for the same dispersant. Due to varying adsorption strengths, the pigment with weaker adsorption may lack sufficient protection, leading to premature flocculation and color separation. Grinding pigments separately—each with a matched dispersant—before blending them into the final paint formulation significantly improves stability.
4. If "floating" only occurs during slow drying, is it related to the dispersant? Yes, it is; however, slow drying extends the time available for pigment migration. If the dispersant provides unequal protection, this migration rate differential is amplified over the longer drying period. You can address this by improving the versatility of the dispersant and appropriately adjusting the drying rate.
5. Why do carbon black systems often negatively affect the overall hue? Carbon black has a large specific surface area and strong adsorption capacity, which causes it to consume a disproportionate amount of the dispersant, leaving other pigments without adequate protection. Carbon black should either be ground separately using a dispersant with multi-point anchoring groups, or, if co-ground, the amount of dispersant should be increased to account for its specific surface area.
6. Can inkjet inks also experience "floating" or "mottling"? It is relatively less common, but it does occur. Color shifts can arise in light-colored inks containing multiple pigments, spot-color inks, or during multi-color overprinting. The approach to troubleshooting is the same as for coatings: check for competitive adsorption among pigments, while also monitoring particle size and filtration.
7. How can one determine whether an issue stems from the dispersant or the solvent? Conduct two sets of comparisons: first, change only the dispersant while keeping the solvent constant to see if the pattern (mottling/streaking) changes; then, adjust only the solvent while keeping the dispersant constant. Whichever set shows a significant improvement points to the root cause. If neither set produces a change, then investigate potential competitive adsorption by the resin or variations between different batches of pigment.


