Professional provision of Chemical Auxiliaries
Provide high-quality products and technical services
Phone:0086-19876879286
Whatsapp:+86 13712258351
Enquiry
{name}{name} DEL
Contact Us
  • Dongguan Ruikun Material Technology Co.,Ltd.
  • TEL:0086-19876879286
  • Mobile phone:0086-19876879286
  • Whatsapp:+86 13712258351
  • Email:info@bestrkchem.com
  • Add:Jianshe Road, Nancheng District, Dongguan City

Which defoamer manufacturer in Zhaoqing is professional and reliable? And where do pinholes in high-speed roller coating for metal printing and coil coating come from?

2026-11-19

Which defoamer manufacturer in Zhaoqing is professional and reliable? And where do pinholes in high-speed roller coating for metal printing and coil coating come from?

 

The metal packaging and coil coating industry in Zhaoqing forms a distinct supply chain, encompassing metal printing, can manufacturing, color-coated steel, and aluminum sheet/strip production—all of which involve high-speed processing lines. In these applications, the coatings are applied in very thin films, and as the rollers spin, they cover thousands of meters; a single pinhole in the paint film renders the finished product defective. To discuss defoamers, one must first understand exactly at what point these bubbles are generated.

 

I. Roll Gaps and Thin Sheets: The Moment Bubbles Are Born

The roll-coating process is, in essence, the transfer of a coating layer from the surface of one roller to another, followed by its application onto a substrate. As the coating passes through the gap between two rollers, it undergoes compression, stretching, and tearing—a process that inevitably traps air. Higher operating speeds exacerbate this air entrapment. Factors such as the viscoelasticity of the coating, the pressure and hardness of the rollers, and the thickness of the coating film all influence the volume of air trapped.

In metal decorating (printing on tinplate), the substrate—typically tinplate—is very thin. Immediately after coating, the sheets enter a drying oven, leaving no time for the trapped air bubbles to rise to the surface. This is why pinholes on metal-decorating lines often appear in a regular pattern, corresponding to the circumference of the rollers. Recognizing this pattern confirms that the issue lies within the coating process itself, rather than being a result of the coating material having degraded.

 

II. Film Thickness and Rapid Curing: How Bubbles Get Trapped in the Paint Film

One might assume that a thinner paint film—offering a shorter path for bubbles to travel—would make it easier for them to escape. In reality, the opposite is often true. A thinner film has a higher surface-area-to-volume ratio, which accelerates solvent evaporation and causes the viscosity of the surface layer to rise rapidly. Consequently, the surface "seals" before the bubbles can reach it. The temperature profile in the initial section of the curing oven is critical here; if the temperature rises too sharply, the surface seals prematurely.

Therefore, an effective defoamer for this type of production line must meet two criteria: it must break bubbles rapidly without requiring an excessive dosage. Adding too much defoamer can impair the leveling of the paint film and alter the transfer rate during roller coating, ultimately leading to roller marks and "orange peel" on the surface. The selection process should begin by identifying a product capable of breaking bubbles even at a low dosage.

There is a simple method to determine whether bubbles originate during the coating process or are already present in the paint itself. Take several pieces of blank substrate and apply the same paint using varying roller pressures and line speeds. If the number of pinholes changes with the line speed, the issue lies in the coating process; if the number remains relatively constant, the problem likely stems from the paint formulation or its preparation (e.g., insufficient settling time). This approach is highly practical for metal-decorating (tinplate printing) lines, as it requires no equipment disassembly.

The temperature profile of the curing oven should be analyzed in segments. If the temperature rises too quickly in the initial section, the surface seals too soon, preventing bubbles from escaping. Conversely, if the temperature rises too slowly, the solvent may not evaporate sufficiently, which can lead to bubble formation further along the line. By recording the temperatures in each zone and comparing them against the locations of the pinholes, you can pinpoint exactly which section is causing the issue.

 

III. Solvent-Borne Systems: Efficiency and Compatibility Limits of Silicones

Many solvent-borne coatings—such as those used for metal decorating (tinplate printing) or as coil coating primers and topcoats—can effectively utilize silicone additives. Polyether-modified silicones, for instance, offer rapid spreading in solvent-borne systems; grades like RK-3067 and RK-3109 demonstrate stable performance in conventional pigmented paints and primers (these are provided as examples to illustrate specific molecular structures).

The primary constraint remains compatibility. Coil topcoats are frequently high-gloss or metallic finishes; the orientation of aluminum flakes or pearlescent pigments is highly sensitive to the condition of the film surface. Silicone migration can cause a metallic finish to appear dull or grayish. For such topcoats, it is advisable to lean toward silicone-free additives—options like RK-3162 or RK-3078 may be considered (again, these are examples illustrating molecular structure types). Alternatively, one could employ a strategy where silicone-containing additives are used exclusively in the primer, while the topcoat remains silicone-free.

Another factor to consider is the material of the application roller. Steel rollers and rubber rollers exert pressure differently: the elasticity of a rubber roller absorbs some of the applied pressure, typically resulting in less air entrapment. Conversely, steel rollers exert more direct, firm pressure, which produces a thinner film but often leads to more pronounced air entrapment. If the incidence of pinholes changes after switching rollers, the root cause—and the direction for adjustment—becomes clear.

 

IV. The Role of Water-Based Systems in the Value Chain

The adoption of water-based coatings on coil coating lines has gained significant momentum over the past two years, particularly for primers used on color-coated steel and aluminum strips. Water-based systems present unique challenges: they are prone to more persistent foam and possess higher surface tension, making it difficult to eliminate air entrapped within the roller nip. For such applications, polyether-modified silicones—such as the RK-8405 or RK-8409 series—are recommended; these should be tested based on the required surface finish and refinement of the coating system (these product codes are provided merely as examples to illustrate specific molecular structures).

Another challenge for water-based systems in high-speed roller coating is the drying process. Due to the high latent heat of vaporization of water, combined with short curing ovens and high line speeds, residual water trapped within the film can impair both curing and adhesion. Defoamers containing a high proportion of hydrophilic segments can exacerbate this issue. Therefore, when selecting a defoamer, it is essential to consider its hydrophilic-lipophilic balance (HLB) rather than focusing solely on its foam-breaking speed.

 

V. UV and PU: Two Supplementary Approaches

The application of UV curing in metal printing—particularly for the exterior coating and certain interior coatings of three-piece cans—is expanding. As UV systems are solvent-free and highly viscous, air bubbles trapped within the roller nip cannot easily escape; their removal relies on efficient bubble-breaking agents combined with a period of static degassing. When selecting a defoamer for such systems, one must first evaluate its impact on the curing rate, yellowing, and odor, before considering its bubble-breaking efficacy. A standard practice involves allowing the coating to settle for a period after roller application before it enters the curing lamp zone.

In the Zhaoqing region, PU (polyurethane) systems—typically two-component formulations—are frequently used for the back-coating of coil stock and in certain composite structures. Bubbles in these systems arise either from mechanical agitation during mixing or from reactions with moisture; the former is addressed through the use of defoamers, while the latter is managed by controlling environmental conditions and the moisture content of the substrate. It is more effective to incorporate small amounts of the additive into both component A and component B, rather than concentrating the entire dosage into just one side.

 

VI. Another Consideration in Continuous Production: Cleaning and Residues

Coil coating lines often run non-stop for hours; transitions between different colors or product types rely on cleaning processes. If any defoamer residue remains in the piping or on the roller surfaces, it will cause "craters" (pinholes) in the first few meters of the next production run. Such issues are frequently misattributed to the paint itself, leading to time-consuming but fruitless troubleshooting.

To address this, select products with good water solubility that are easy to clean, and use a compatible solvent to flush the system during color changes. Silicone-based additives are particularly difficult to remove, so extra caution is required when using them in primers. We believe that for continuous production lines, "ease of cleaning" should be included in the selection criteria alongside "defoaming speed"—a point that is all too often overlooked.

Furthermore, there is the aspect of regulatory compliance. Internal coatings for metal packaging (such as those used for food cans) involve food contact; therefore, all additives must meet relevant regulatory standards. Ensuring that the supplier can provide documentation of compliance is a fundamental prerequisite. This requirement should be at the very top of your selection checklist—do not wait until the final product is being tested to address it.

 

VII. Supply Side: The Risk of Batch-to-Batch Variation in Continuous Production Lines

For continuous production lines, the primary requirement for additives is, above all, stability. If the defoaming speed of one batch differs even slightly from the previous batch—despite being the same product grade—operators are forced to adjust roller pressure, line speed, and a cascade of other process parameters. Dongguan Ruikun Material Technology Co., Ltd. is a specialized manufacturer of polymer additives, featuring its own R&D department and production facilities. Its products are synthesized via chemical reactors rather than through simple blending or private-label repackaging. The company offers comprehensive product lines—including defoamers, dispersants, leveling agents, wetting agents, anti-oil agents, and anti-scratch agents—all characterized by stable chemical structures and reliable, high-performance properties that meet the rigorous demands of relevant application systems. With localized supply, competitive pricing, and short lead times, the company helps clients effectively manage their procurement costs.

Manufacturers in Zhaoqing can request that suppliers provide retained samples from several consecutive batches. By testing these samples under identical conditions—specifically evaluating defoaming performance and film surface quality—one can verify whether the data remains consistent. Only when the data aligns should the materials be introduced into the production line.

 

Frequently Asked Questions

Q: Why do pinholes on a metal-decorating (tinplate) coating line appear in a regular pattern? A: This is often related to air entrainment at the roller nip, where bubbles enter the paint film at intervals corresponding to the roller's circumference. Check the roller pressure, line speed, and the viscoelasticity of the coating; also, adjust the dosage and addition point of the defoamer.

 

Q: How should a defoamer be selected for a film-forming system that requires rapid drying (baking)? A: Prioritize products that offer fast bubble-breaking at low dosage levels, rather than relying on higher dosages to suppress foam. Excessive dosage can negatively affect leveling and transfer efficiency, leading to roller marks and "orange peel" on the film surface.

 

Q: Will using a silicone-based defoamer in metallic topcoats affect the orientation of aluminum flakes? A: Yes, it will. The migration/precipitation of silicone can cause the metallic finish to appear dull or grayish. For such topcoats, it is recommended to use silicone-free defoamers, or to restrict the use of silicone-based additives to the primer layer only.

 

Q: What other factors should be considered regarding defoaming when using waterborne coatings on a coil-coating line? A: Beyond bubble-breaking, one must consider the hydrophilic-lipophilic balance (HLB). An excess of hydrophilic segments can lead to increased water retention within the film, which may impair curing and adhesion.

 

Q: How can air bubbles be removed from UV-curable metal-decorating coatings? A: This is achieved through efficient bubble-breaking combined with a "settling" (degassing) period. When selecting a defoamer, ensure it does not interfere with the curing rate, cause yellowing, or introduce unwanted odors. Allow the coating to settle after roller application before it enters the UV curing zone.

 

Q: If "craters" (fish-eyes) appear in the first few meters of coating after a color change, is the paint at fault? A: This is often caused by residual defoamers or other additives remaining in the supply lines or on the roller surfaces. Choose additives that are easy to clean, and use a compatible solvent to flush the system during color changes.

 

Q: How should a supplier of defoamers be evaluated for a continuous production line? A: Retain samples from several consecutive batches and compare their performance—specifically bubble-breaking speed, film surface quality, and ease of cleaning—under identical conditions. Only products that consistently meet the required data benchmarks are suitable for use on the production line.